From uncertaintyto stability
02.15
050
02.15
02.08 sensors are designed for short-time melt temperature measurement in electrolyte pot.
Cable temperature-sensing element with diameter 2 or 3 mm (cable sheath material - steel AISI 310) is located outside of protective tube. Extension length should be agreed with the Customer.
Immersion part length is not more than 250 mm.
Mounting sections can be manufactured according to the Customer's drawings.
New thermocouple design - CTx 02.15 modification - developed in cooperation with specialists of OAO RUSAL Sayanogorsk is recommended for electrolyte pots.
The benefit of 02.15 modification is short thermal reaction time and, subsequently, faster melt parameter measurement and longer thermocouple useful life.
In 02.15 modification cable temperature-sensing element with 1.5 mm diameter is located outside of protective tube. Extension length should be agreed with the Customer.
Immersion part length is not more than 120 mm.
Mounting sections can be manufactured according to the Customer's drawings.
02.15 thermocouple design is covered by utility model patents NN 66040, 133923.
|
Hot junction |
one |
|
|
Vibration resistance GOST R 52931 |
group V3 |
|
|
Seismic resistance MSK-64 |
grade 9 for unit installation up to 70 m above zero mark |
|
|
Nominal (rated) pressure |
0,1 MPa |
|
|
Climatic category GOST 15150 |
UHL2Ambient temperature: -60..+120ºС for general purpose products |
|
|
Calibration |
Only initial during production, are not subject |
|
|
Response time τ 0,63: |
02.08 |
|
|
02.15 |
|
|
|
Reliability measures |
Not rated |
|
|
CT type |
Modification |
Thermowell material |
Group of operating conditions |
Application |
Calibration |
Mean lifetime |
|
CTK, CTN |
02.08 |
S10 |
IV |
-200…+1100 |
Not rated |
|
|
02.15 |
- 200…+1000 |
|||||
|
CTK |
|
02.15 |
— |
0 |
60 |
— |
c1 |
— |
U |
|
— |
Т45 |
— |
8 |
— |
L |
/ |
l |
- |
L1 |
/ |
L2 |
|
1 |
|
2 |
|
3 |
4 |
|
5 |
|
6 |
7 |
|
8 |
|
9 |
|
10 |
|
11 |
|
12 |
|
13 |
|
NN |
Parameter name |
Code |
Description |
|||
|
1 |
Sensor type |
CTK, CTN |
Mineral insulated cable thermocouple with type according to IEC 60584 and ASTM E230 |
|||
|
2 |
Modification |
02.08 |
|
|||
|
02.15 |
|
|||||
|
3 |
Terminal head |
0 |
Free electrode ends 50mm |
IP65 |
general purpose |
|
|
2 |
miniature plug |
IP40 |
general purpose |
|||
|
4 |
standard plug |
IP40 |
general purpose |
|||
|
4 |
Wire version (see "Alternative designs" table, pages 1-14) |
50 |
Stranded conductor, silicon / shield / silicon insulation - shield is insulated from sensor body and does not have a terminal |
|||
|
60 |
Stranded conductor, PTFE / shield / PTFE insulation - shield is insulated from sensor body and does not have a terminal |
|||||
|
5 |
Sensor class designation |
c1; c2 |
For further details see table 5 page 2-9 |
|||
|
6 |
Hot junction |
G |
grounded junction, |
|||
|
U |
ungrounded junction |
|||||
|
7 |
Number of wire couples |
Not filled |
1 wire couple |
|||
|
8 |
Outer sheath |
S10 |
steel 12Cr18Ni10T |
|||
|
9 |
Outer diameter |
4.5 |
For 02.15 |
|||
|
13 |
For 02.03 |
|||||
|
10 |
Probe length, L |
500÷2000 |
For 02.05 probe length can be up to 1250 mm |
|||
|
11 |
extension wire length ℓ |
250÷10,000 |
specify size (mm):250, 320, 500, 1000, 2000, 3150 and more |
|||
|
12 |
Distance from sensor edge to mounting surface L2 |
60÷200 |
specify dimensions in mm |
Only for 02.15 |
||
|
Distance from sensor edge to mounting element L2 |
L1÷250 |
|||||
|
CTK 02.15-260 - c1 - G - S10 - 4.5 - 1250/700-120/165
|
Product type |
CT |
cable thermocouple |
|
Type of TC |
K |
chromel-alumel |
|
|
Explosion protection |
- |
general purpose |
|
|
Modification |
02.15 |
|
|
|
Terminal head |
2 |
miniature plug |
|
|
Wire type |
60 |
PTFE / shield / PTFE |
|
|
Tolerance class |
c1 |
first class |
|
|
Junction type |
G |
grounded |
|
|
Working end material |
S10 |
steel 12Cr18Ni10T |
|
|
Sheath diameter |
4.5 |
mm |
|
|
Cable part length |
1250 |
mm |
|
|
Wire length |
700 |
mm |
|
|
Immersion length |
120 |
mm |
|
|
Probe length |
165 |
mm |
.jpg)